6.7L Diesel Injector (2013-07)

BEFORE YOU INSTALL

Do a preliminary tightening of the injector hold down bolts to 5n.m (44 in.lbs torque)

Do a preliminary tightening of the fuel injector sleeve and nut to 15n.m (11 ft.lbs torque)

Then final tightening of injector hold down bolts to 8n.m (71 in.lbs torque)

Followed by final tightening of fuel injector sleeve to 50n.m (37 ft.lbs torque)

Verify copper washer from old injector was not left in the injector cup

Diesel Air Intake Heater

Diesel Fuel Injector Sleeve

Diesel Fuel Injection Pump - New

Remanufactured at our IATF 16949, ISO 9001, and ISO 14001 certified facility to ensure performance and reliability
Undergoes rigorous, multi-step cleaning process before reassembly to remove all oil and debris
Critical tolerances of components measured, visually inspected, and electrical tested, and either replaced or reconditioned as needed
Enhanced with new core components such as O-rings, springs, nozzles, delivery valves, shims, gaskets, and solenoids
Reassembled using precision tooling in temperature- and humidity-controlled room with fixturing on all stations
Undergoes extensive testing against OEM, including shot-to-shot, fuel delivery, and response time tests at different pulse widths, pressure levels, and RPMs
Laser-etched part number and date code ensures accuracy and traceability
Final package is sealed to provide protection from elements encountered during shipping and storage